400W Watt Flexible Solar Panels 12V 24V Battery Charger Inverter Controller Kit

SKU: MSP-400W
In Stock

$82.69$365.39

  • Type : Monocrystalline Solar Panels
  • Power : 400W
  • Maximum Power Voltage : 18V
  • Maximum Power Current : 5.55A
  • Number of Cells : 36 Cells
  • Warranty : 2 Years Manufacture Warranty
Add to Wishlist
Add to Wishlist
Estimated delivery dates: Mar 8th - Mar 13th

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Best Price

Competitive Price

24/7 Customer Service

Response Within 10 Minutes

Free Shipping

Worldwide Expedited & Secure

14 Days Free Returns

Refund & Exchange Accepted

Have a Question? Ask a Specialist

+1 (702) 530-7352 Start Live Chat

Description

400W Monocrystalline Solar Panels 

Clean Energy for Every Lifestyle400W Solar panels full set

  • The power generation efficiency is about 1.3 times that of conventional polysilicon, and the overall area is smaller at the same power.
  • Semi-flexible design, Graceful appearance, delicate cabinet;
  • The surface is made of PET and treated with a special process, which is more wear-resistant and improves the absorption efficiency of sunlight.
  • Convenience to take, fashionable elegance. PV connector can be suitable to connect a controller.

Especially suitable for anywhere can obtain sunshine, realize efficient charging, use convenient and safe, environmental protection, and energy saving. This can be used in various scenarios such as households, camping, RVs, yachts, street lights, and solar power stations.

  • The junction box adopts an IP67 waterproof design and contains a bypass diode, and the circuit adopts an overcharge and reverse current protection design.
  • Use a photovoltaic special cable and PV connector. Its outdoor use is safe, waterproof, high-temperature resistance, and weather resistant. PV connector is easy to use, plug and play.
  • This product is a solar module. It is recommended to be used with controllers and batteries.

Product Details

Solar panel Electrical Specification

  • Maximum power
Pmax100 W
  • Open circuit voltage
Voc21.6 V
  • Maximum power point voltage
Vmpp18 V
  • Short-circuit current
I sc6 A
  • Maximum power point current
I mpp5.5 A

Minor reduction in efficiency under partial load conditions at 25°c : at 100 W/m2, 95%- (+/-3%) of the STC (Performance Under Standard Test Conditions) efficiency (1000 W/m2) is achieved.

Solar panel Component Material

  • Main material : Monocrystalline silicon
  • Cells per module : 36 Cells
  • Cell type : Monocrystalline Silicon
  • Cell dimensions : 158mm * 158mm / 158 * 79mm
  • Front : EVA + Plastic Cover
  • Frame material : PET+EVA+Cell+TPT

System Integration Technician

  • Maximum system voltage SC II
1000 VMaximum reverse current10A
  • Maximum system voltage USA NEC
600 VIncreased snow load acc. to IEC 612155.4 kN/m2

Thermal Characteristics

  • NOCT
47 °cTC Voc-0.33 %/°c
  • TC Isc
0.042 %/°cTC Pmpp-0.45 %/°c

Solar panel Extra Specification

  • PTC rating
100 W
  • Module efficiency
22.0%
  • Junction box
IP67
  • Plus-Sorting*
Pflash ge Pmax
  • Cable Length
0.9 M
  • Power tolerance*
+/- 5 %

Dimensions

Solar panel specs

  • Length (mm) : 1000mm
  • Width (mm) : 500mm
  • Height (mm) : 2.5mm
  • Net Weight (kg) : 1.65kg

Package included :

  • 100W kit
    • 1 x 100w solar panel
    • 1 x 10A 12V / 24V charge controller
    • 1 Set Extension cable with PV connector
    • 1 Set cable with alligator clip (connect to battery)
  • 200W kit
    • 2 x 100w solar panel
    • 1 x 20A 12V / 24V charge controller
    • 1 Set Extension cable with PV connector
    • 1 Set 2 in-1 PV connector
    • 400W Solar panels infos1 Set cable with alligator clip (connect to battery)
  • 300W kit
    • 3 x 100w solar panel
    • 1 x 30A 12V / 24V charge controller
    • 1 Set Extension cable with PV connector
    • 1 Set 3 in-1 PV connector
    • 1 Set cable with alligator clip (connect to battery)
  • 400W kit
    • 4 x 100w solar panel
    • 1 x 40A 12V / 24V charge controller
    • 1 Set Extension cable with PV connector
    • 1 Set 4 in 1 PV connector
    • 1 Set cable with alligator clip (connect to battery)

Notes for use :Solar panel connection method

  1. This product must not come into contact with highly corrosive substances.
  2. It is strictly forbidden to modify, disassemble, drop, and hit the junction box and products by yourself, avoid stepping on the surface and scratching the surface with hard objects during use.
  3. A large number of scratches or dirt on the surface of the solar panel may cause the solar cell module to be inefficient, and in severe cases may cause burnout.
  4. The suitable ambient temperature range of this product: is -20 ° C-80 ° C, please do not exceed this range.
  5. The solar panel must be installed in an area with good sunlight and no shadow. The long-term work of the solar cell module in the sun with shadow may have the risk of burning.
  6. It is forbidden to connect the positive and negative poles of the product together, and it is forbidden to put the product into water or fire, otherwise, it will damage the product.
  7. The overall power of the photovoltaic module must be less than the rated power of the controller (rated voltage × rated current). It is strictly prohibited to overload the controller.
  8. The total voltage of the photovoltaic module connected to the controller must be within the photovoltaic input voltage range of the controller.
  9. The inverter can only be connected to the battery, not directly to the controller

Safety Instructions :

  1. Make sure your battery has enough voltage for the controller to recognize the battery type before the first installation.
  2. The battery cable should be as short as possible to minimize loss.
  3. The regulator is only suitable for lead acid batteries : OPEN, AGM, GEL, and lithium ions (It is not suited for nickel metal hydride or other batteries).
  4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.

Controller connection instructions : 

  1. Before connecting the solar panel, please connect the controller to the battery first. Connecting the solar panel without connecting the battery may cause the controller to burn out and fail to display.
  2. After the controller is connected to the storage battery, connect the above-mentioned series or parallel solar panels to the controller through the transfer cable.
  3. Finally, connect the required DC load to the load end of the controller. If the load does not work, press the third button of the controller.
  4. According to the controller manual, adjust the parameters you need.

Our Policies

Shipping Policy

  • All items are brand new and 100% tested before shipping.
  • All items will be shipped within 1-2 business days after payment is cleared.
  • Your package will be shipped from our warehouse.
  • Delivery time varies between 2-5 business days or longer depending on the shipping area.
  • We will try our best to make a fast shipment.

Return and Refund Policy

  • All our products have been checked and packed in good condition.
  • We offer a full guarantee on all items bought from our store.
  • If the products are not the same as the description or are broken in transit. we will resend them or refund the money to you.
  • We accept returns within 14 days after you receive the package.
  • We highly appreciate that you can contact us first if any problem occurs.
  • We will do our best to resolve the issues for you.

Do You Have Any Questions?

After-Sale Service

If There Are Any Questions, Don’t Hesitate To Get In Touch With Us In Advance. We Will Reply To You Within 24 Hours (Except Holidays).

Additional information

Weight1.65 kg
Dimensions100 × 50 × 0.25 cm
Power

400W

Maximum Power Voltage

18V

Maximum Power Current

5.55A

Frame Material

PET + EVA + Cell + TPT

Certification

CE, ROHS, UL

Warranty

2 Years Manufacture Warranty

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: